Why a Galvanised Steel Frame Makes Better Decking

Quick answer: most decks fail from the frame up. A galvanised steel frame does not rot or attract insects, so paired with composite boards such as Millboard the whole deck is built from materials that last.

Most decking fails from the bottom up. The boards look fine, but the timber frame underneath is damp, slowly rotting and starting to move. A steel frame removes that weak point.

The problem with a timber frame

A deck frame sits close to the ground, in the damp, with little airflow. Timber in that position is exposed to moisture, rot and insects. When the frame moves, boards lift, screws loosen and the deck goes uneven.

Decking steps leading down to the garden
Photo by Cameron Smith on Unsplash

What a galvanised steel frame gives you

  • No rot and no insects. Steel does not decay the way timber does.
  • Corrosion protection. Galvanising coats the steel in zinc to protect it from rust.
  • A straighter, stiffer frame. Steel does not warp or twist as it dries out.
  • Strength for awkward sites. Sloping ground, longer spans and raised decks are easier to plan.

Pairing it with composite boards

Composite boards such as Millboard are made to resist rot and to hold their look for a long time. Fitted on a steel frame, there is no hidden weak link. It is a combination that suits a damp Scottish climate.

Before you build

According to mygov.scot, decking at the back of a house is usually permitted development if the floor is no higher than 0.5 metres above the ground and the total height is no more than 2.5 metres. In a conservation area or the grounds of a listed building, the footprint can be no more than 4 square metres. Your council may also ask for building regulation approval, particularly for raised decks. Check with them first.

What it costs

A steel frame costs more at the start than timber. Over the life of the deck there is usually less maintenance and less to replace. Ask for a quote for both so you can compare.

Boards: composite or timber?

Timber boards look natural but need regular care in a wet climate. Composite boards such as Millboard are designed to resist rot and to hold their appearance with less upkeep. Whichever you choose, a stable frame underneath keeps boards flat and fixings tight.

Ventilation and drainage

Whatever the frame is made of, a deck needs airflow underneath and a way for water to drain away. A deck built tight to damp ground with no ventilation will hold moisture. Planning the levels, gaps and falls at the start avoids problems later.

Steps, handrails and lighting

Raised decks need safe steps and a properly built handrail or balustrade, and may need building regulation approval. Because the steel and the decking come from the same workshop, the steps, railings and any lighting can be designed together. Iron Design By Rory also makes railings in steel.

Ground, slopes and awkward gardens

Sloping gardens, soft ground and raised areas are where a steel frame can be a big help. The frame can be fabricated to suit the levels and fixed to proper foundations, so the deck sits level and stays that way.

Frequently asked questions

Does a steel frame need planning permission?

The same rules apply whatever the frame is made of. See ‘Before you build’ above and check with your council.

Is galvanised steel suitable outdoors?

Yes. Galvanising coats the steel in zinc to protect it from rust.

Iron Design By Rory offers decking and landscaping, and is listed as a Millboard installer. Ask Rory about a steel-framed deck for your garden.

Talk to Iron Design By Rory

Planning a deck? Call Rory on 07792 484285, email irondesignbyrory@hotmail.co.uk, or request a free quote. The workshop is at Unit 7, Strathenry Mills, Glenrothes, KY6 3HA. See more finished work in our portfolio or on our services page.

Source: mygov.scot: Add decking to your house.

Scroll to Top