Steel Balconies and Balustrades: What Scottish Building Standards Expect

Quick answer: in Scotland a balcony barrier is usually 1100mm high, and gaps must be small enough that a 100mm sphere cannot pass through. Your council’s building standards team confirms the figure for your exact job.

A steel balustrade does two jobs. It keeps people safe at an edge, and it is the part everyone sees. In Scotland the safety side is set by the Building Standards, so it pays to know the rules before you design anything.

The heights that matter

The Scottish Building Standards technical handbook for homes sets minimum barrier heights. The main ones:

  • 1100mm for most locations, which is where a balcony or other raised outdoor platform will usually sit
  • 900mm on a stair outside a dwelling, or on a landing or raised area inside one
  • 840mm on a stair wholly inside a dwelling

The handbook does not name balconies on their own, so your council’s building standards team has the final say on which figure applies. Ask them before work starts.

Welder at work with sparks flying
Photo by Daniel Wiadro on Unsplash

The 100mm rule

Gaps in a barrier should be small enough that a 100mm sphere cannot pass through. That is why you see closely spaced vertical bars on a safe balustrade. Barriers should also not be easy for young children to climb, so footholds should be kept to a minimum.

What this means for the design

This is where a blacksmith earns their keep. Steel can be formed into almost any pattern, but the pattern has to pass the sphere test and resist climbing. Vertical bars, flat-bar spindles and glass infill all work. Decorative scrollwork can too, if the spacing is right.

Getting it right first time

  1. Check with your local council’s building standards team whether you need a warrant.
  2. Agree the barrier height for your exact location.
  3. Choose a finish that suits your site. Galvanising, paint or powder coat each have a place.
  4. Have the fixings designed for the loads the barrier must carry.

Choosing a style

  • Vertical bars: the classic choice. Easy to keep within the 100mm rule and hard to climb.
  • Flat-bar spindles: a slimmer, more contemporary look.
  • Glass infill: keeps the view open. The glass must be suitable for use as a barrier, so ask your blacksmith or glazier.
  • Scrollwork and bespoke patterns: a chance to make the balcony one of a kind, as long as the spacing still passes the sphere test.

Finishes that last

An outdoor balustrade lives in Scottish weather, so the finish matters as much as the design. Hot-dip galvanising coats the steel in zinc to protect it from rust, and it can be painted or powder-coated on top for colour. A finish applied to bare steel with no galvanising underneath will need more upkeep over the years. Ask what finish is proposed, and how it will be looked after.

Fixings are part of the safety

A barrier is only as strong as what it is fixed to. Posts need to be secured into sound masonry, concrete or structure, with fixings suitable for the material. A balustrade that looks fine but is fixed into weak or damaged material is a risk. A made-to-measure job lets the fixings be planned at the same time as the design, rather than as an afterthought.

Why choose a local blacksmith

A local maker can visit your property, measure properly and see the conditions the steel will face. They can also come back if something needs adjusting. That is difficult with a catalogue product sent from elsewhere.

Frequently asked questions

Do I need a building warrant for a balcony or balustrade?

Often, yes. Check with your council’s building standards team before work starts.

What gap is allowed between bars?

Small enough that a 100mm sphere cannot pass through.

Can I have decorative scrollwork?

Yes, if the spacing passes the sphere test and the pattern is not easy to climb.

Iron Design By Rory is a family metalwork business in Glenrothes, making railings, gates, staircases and bespoke pieces to order in wrought iron and steel, on their own or combined with wood and glass.

Talk to Iron Design By Rory

Thinking about a balcony or balustrade? Call Rory on 07792 484285, email irondesignbyrory@hotmail.co.uk, or request a free quote. The workshop is at Unit 7, Strathenry Mills, Glenrothes, KY6 3HA. See more finished work in our portfolio or on our services page.

Source: Scottish Building Standards technical handbook 2022: domestic, 4.4 Pedestrian protective barriers.

Scroll to Top